|
 |
Expansion vessel kit 12 litre.
The pressurised solar expansion system kit is designed to make installation of a sealed system as easy as possible.
|
|
|
|
|
 |
18 litre expansion vessel including mounting bracket.
Connection: 3/4"
Dimensions: 420 x 270 mm
Manufactured from carbon steel.
|
|
|
|
|
 |
12 litre expansion vessel inc. mounting bracket.
Manufactured from carbon steel.
|
|
|
|
|
 |
Circulation pump plus isolation valves.
3-speed circulation pump (approx 40w, 60w, 80w).
Mains powered for solar circuits.
Includes a pair of brass ball valves.
|
|
|
|
|
 |
Ecocirc E4 vario circulation pump
Low Energy Consumption (9W minimum).
Electronically commutated permanent magnet technology.
|
|
|
|
|
 |
25 Litre Sealed System Kit.
Inc. 1.0 Bar Easifit Heating Vessel and Bracket.
|
|
|
|
|
 |
KIT FOR EXPANSION VESSELS
Includes: Pressure relief valve, pressure gauge and filling loop with non-return valve.
|
|
|
|
|
 |
Solar Filling kit (for antifreeze)
Used for filling pressurised solar systems with antifreeze/water mixture.
Holds up to 8 litres.
Low cost filling system.
|
|
|
|
|
 |
Mechanical flow meter.
Mechanical flow meter - to provide flow rate readings.
|
|
|
|
|
 |
5 Litres Solar Antifreeze.
5 litres neat Propylene Glycol solar antifreeze with additive package.
|
|
|
|
|
 |
10 Litres Solar antifreeze.
10 litres of neat Propylene Glycol with additive package.
|
|
|
|
|
 |
Whole House TMV.
The Heatstat T2 TMV has been specially designed for the domestic market (TMV2 Scheme Approved) to reduce the number of scalding accidents.
|
|
|
|
|
 |
Hot water divert valve.
Hot water divert valve for use with combination boilers or instantaneous water heaters.
|
|
|
|
|
 |
High Temp Silicone Sealer.
This external high temperature sealant (300C) for solar thermal and solid fuel systems (eg: log burners).
|
|
|
|
|
|
Fitting Kit for Whole House Mixer Valve Optional Fitting Kit for the Whole House Mixer Valve.
Consists of Inlet filters and isolation valves.
|
|
|
|
|
 |
Pair of Solardek Flashings
Solardek is a speciality flashing designed specifically for flashing solar panels on both tile and slate roofs.
|
|
|
|
|
|
Swithenbanks ancillary products such as pumps, non-return valves and high temperature armaflex insulation in a range of diameters and wall-thicknesses are available, along with continuous pipework, both 10mm copper and pre-insulated stainless steel flexi-pipe (duoflex, naviflex).
|
