How Does The Solar Tube Work?

This high tech unit concentrates the sun's energy at the tip of the copper 'heat tube' - like a solid state magnifying glass!

The vacuum tube solar panel has been around for over 10 years, and has proved to be reliable and dependable. The solar evacuated tube consists of a double wall glass tube made from strong borosilicate glass (i.e. Pyrex) with a space in the centre which contains the heat pipe. The sun's radiation is absorbed by the selective coating on the inner glass surface, but prevented from re-radiating by the silvered innermost lining. This is in effect like a one-way mirror which has been optimised for infra-red radiation. In fact it is very efficient, of the sun light's energy hitting the tube's surface, 93% is absorbed, whereas only 7% is lost through reflection and re-emission. The presence of the vacuum wall prevents any losses by conduction or convection - just like a thermos flask. Because of this, the system will work even in very low temperatures, unlike traditional flat plate collectors. This is why our Swithenbanks solar evacuated tube system can be used to heat up water at the South Pole Antarctic Science Base - where ambient air temperatures can drop below -40°C. The heat transferred to the tip of the heat pipe is in turn transferred to a copper manifold in which water circulates to heat the domestic hot water tank. If a tube is placed in direct sunlight on a summer day, the tip temperature can reach 250°C - so the system easily heats domestic hot water cylinders to 60°C even in cooler weather! The manifold is heavily insulated with a 2" thickness of pre-formed Rockwood to keep the heat in. Unlike flat plates, these headers are so well insulated that they should not require antifreeze in normal operation - the temperature of the header is unlikely to fall below 10°C even in very cold weather. The more advanced solar controllers include a low-temperature facility- should the temperature of the collector fall below a defined level, the pump will operate to allow the the water at the bottom of the tank to heat the collector slightly. In normal conditions, this would never be necessary - but it acts as a good safety margin.        

 

 

The swithenbanks vacuum tube solar panel (evacuated tube).